ISG model is single-stage end-suction(axial suction) cantilever type centrifugal pump, which is used to transport corrosive liquid with viscosity similar to water and without solid particles. The marked and rated performances and dimensions adopt international standard.
ISW type horizontal pipeline pump is designed by using hydraulic model and performance parameters of is centrifugal pump on the basis of general horizontal pump. At the same time, according to the different operating temperature and medium, the suitable hot water pump, high temperature pump, corrosive chemical pump and oil pump are dispatched on the basis of ISW type. ISW single stage single suction horizontal pipeline centrifugal pump has the advantages of energy saving, low noise and good performance.
Non-clogging pulp pump after practical use, less leakage, good anti-clogging, smooth operation, high reliability, compact structure and other characteristics.Non-clogging pulp pump is mainly reflected in the following aspects: the use of half-open or fully open impeller, wear-resistant plate and the front side of the impeller clearance is adjustable, the shaft seal mainly uses mechanical seal and the selection of high-precision bearings and shaft materials.